Double row self aligning ball bearings
Self-Aligning Double Row Ball Bearings Other Types of Spherical Bearings. There are other types of "spherical bearings" including spherical... Self-Aligning Double Row Roller Bearings Also Available. Selecting the Correct Self-Aligning Bearing. Double row self-aligning bearings utilize an inner ring with two rows of balls in two deep raceways, and an outer ring with a single spherical raceway. In this way, the inner and outer rings can be misaligned relative to each other. The resulting effect is a comparatively large angle imposing moment loads upon the balls.
Double - row bearings handle thrust loads in both directions. Open bearings dissipate heat more efficiently than shielded and sealed bearings. Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
- 45,000 mm x 85,000 mm x 19,000 mm SNR 1209 Double row self aligning ball bearings
- Guardian® Flange
- 1.9690 in
- 40 mm x 80 mm x 18 mm NTN 1208SKC3 Double row self aligning ball bearings
- Two Contact Seals
- 85 mm
- 40 mm x 80 mm x 18 mm NTN 1208S Double row self aligning ball bearings
- Solid Pillow Block
- 3.6875 in
- 40 mm x 80 mm x 18 mm SNR 1208KC4 Double row self aligning ball bearings
- Click here
- Without Snap Ring
- 40 mm x 80 mm x 18 mm SNR 1208KC3 Double row self aligning ball bearings
- Lubrication Groove &
- ABMA, ISO, MS 51961-
- 40 mm x 80 mm x 18 mm SNR 1208C3 Double row self aligning ball bearings
- 2.0000 in
- Uncoated
- 40,000 mm x 80,000 mm x 18,000 mm SNR 1208 Double row self aligning ball bearings
- UL, AFBMA, AGMA, ASM
- Set Screw
- 35 mm x 72 mm x 17 mm NTN 1207SKC3 Double row self aligning ball bearings
- 4.5000 in
- Complete Assembly D2
- 35 mm x 72 mm x 17 mm NTN 1207SK Double row self aligning ball bearings
- Cone & Cup
- 3.1875 in
- 35 mm x 72 mm x 17 mm NTN 1207SC3 Double row self aligning ball bearings
- Two-Bolt Base
- 3.1250 in