CARB toroidal roller bearings
CARB toroidal roller bearings have one row of long, slightly barrel-shaped symmetrical rollers and torus-shaped raceway profiles . They are non-locating bearings and accommodate exclusively radial loads. CARB bearings are often used to replace the non-locating spherical roller bearing in a locating/non-locating bearing arrangement.Depending on their series and size the following open CARB toroidal roller bearings are available as standard: bearings with a roller centred cage bearings with an inner ring centred cage ()full complement bearings with a retaining ring.The load carrying capacity of full complement CARB bearings is considerably higher than that of same-sized bearings with a cage.
The CARB bearing is a single row roller bearing with relatively long, slightly crowned rollers. The inner and outer ring raceways are correspondingly concave and symmetrical . The outer ring raceway geometry is based on a torus, hence the term toroidal roller bearing. The SKF toroidal roller bearing is designed as a non-locating bearing.
- 440 mm x 720 mm x 280 mm skf C 4188 K30MB CARB toroidal roller bearings
- 440 mm x 720 mm x 280 mm
- 460 mm x 830 mm x 296 mm skf C 3292 KMB CARB toroidal roller bearings
- 10.2500 in
- 1.3300 in
- 800 mm x 1150 mm x 258 mm skf C 30/800 KMB CARB toroidal roller bearings
- 12000 fpm
- -22 to 400°F
- 75 mm x 105 mm x 54 mm skf C 6915-2CS5V/GEM9 CARB toroidal roller bearings
- Two-Bolt Base
- 6.31 to 7.19 in
- 110 mm x 170 mm x 60 mm skf C 4022 V CARB toroidal roller bearings
- Side Mount
- Non-Expansion Bearin