CARB toroidal roller bearings
CARB toroidal roller bearings have one row of long, slightly barrel-shaped symmetrical rollers and torus-shaped raceway profiles . They are non-locating bearings and accommodate exclusively radial loads. CARB bearings are often used to replace the non-locating spherical roller bearing in a locating/non-locating bearing arrangement.Depending on their series and size the following open CARB toroidal roller bearings are available as standard: bearings with a roller centred cage bearings with an inner ring centred cage ()full complement bearings with a retaining ring.The load carrying capacity of full complement CARB bearings is considerably higher than that of same-sized bearings with a cage.
The CARB bearing is a single row roller bearing with relatively long, slightly crowned rollers. The inner and outer ring raceways are correspondingly concave and symmetrical . The outer ring raceway geometry is based on a torus, hence the term toroidal roller bearing. The SKF toroidal roller bearing is designed as a non-locating bearing.
- 95 mm x 200 mm x 67 mm skf C 2319 K CARB toroidal roller bearings
- Two-Bolt Base
- Max 250°
- 75 mm x 115 mm x 40 mm skf C 4015 V CARB toroidal roller bearings
- 3.5000 in
- Nomex Seal
- 600 mm x 870 mm x 200 mm skf C 30/600 M CARB toroidal roller bearings
- 17100 lbf
- Inner Ring
- skf C 3152 K + OH 3152 HTL CARB toroidal roller bearings
- 200° °F
- Gray Paint
- skf C 2213 KTN9 + AH 313 G CARB toroidal roller bearings
- 1.7500 in
- Black Oxide
- 150 mm x 225 mm x 75 mm skf C 4030-2CS5V/GEM9 CARB toroidal roller bearings
- Maximum of +120
- C0
- 180 mm x 300 mm x 118 mm skf C 4136 V CARB toroidal roller bearings
- 4113 lb
- -65 to +250 &de
- 560 mm x 750 mm x 140 mm skf C 39/560 M CARB toroidal roller bearings
- 4.75 Inch
- Standard
- 460 mm x 760 mm x 240 mm skf C 3192 M CARB toroidal roller bearings
- In Stock
- Open Type