CARB toroidal roller bearings
CARB toroidal roller bearings have one row of long, slightly barrel-shaped symmetrical rollers and torus-shaped raceway profiles . They are non-locating bearings and accommodate exclusively radial loads. CARB bearings are often used to replace the non-locating spherical roller bearing in a locating/non-locating bearing arrangement.Depending on their series and size the following open CARB toroidal roller bearings are available as standard: bearings with a roller centred cage bearings with an inner ring centred cage ()full complement bearings with a retaining ring.The load carrying capacity of full complement CARB bearings is considerably higher than that of same-sized bearings with a cage.
The CARB bearing is a single row roller bearing with relatively long, slightly crowned rollers. The inner and outer ring raceways are correspondingly concave and symmetrical . The outer ring raceway geometry is based on a torus, hence the term toroidal roller bearing. The SKF toroidal roller bearing is designed as a non-locating bearing.
- 400 mm x 600 mm x 148 mm skf C 3080 M CARB toroidal roller bearings
- 4-15/16 in, 4-7
- Bearing Parts Kit
- 240 mm x 400 mm x 128 mm skf C 3148 K CARB toroidal roller bearings
- Carbon Steel /
- Carbon Steel
- skf C 31/630 KMB + AOH 31/630 CARB toroidal roller bearings
- Set Screw
- 8.4688 in
- skf C 31/1000 KMB + AOH 31/1000 CARB toroidal roller bearings
- Guardian® Flange
- 0.020 in
- skf C 3148 K + AOH 3148 CARB toroidal roller bearings
- Normal Duty
- 4650 lbs
- 180 mm x 280 mm x 100 mm skf C 4036 V CARB toroidal roller bearings
- 3.5313 in
- Contact with Flinger
- 190 mm x 320 mm x 104 mm skf C 3138 KV CARB toroidal roller bearings
- 1261 kN
- 7316576603532
- skf C 3076 KM + OH 3076 H CARB toroidal roller bearings
- 49500 lbf
- Single-Row Non-Fill
- 420 mm x 620 mm x 150 mm skf C 3084 M CARB toroidal roller bearings
- 23400 lb
- 2500 RPM