CARB toroidal roller bearings
CARB toroidal roller bearings have one row of long, slightly barrel-shaped symmetrical rollers and torus-shaped raceway profiles . They are non-locating bearings and accommodate exclusively radial loads. CARB bearings are often used to replace the non-locating spherical roller bearing in a locating/non-locating bearing arrangement.Depending on their series and size the following open CARB toroidal roller bearings are available as standard: bearings with a roller centred cage bearings with an inner ring centred cage ()full complement bearings with a retaining ring.The load carrying capacity of full complement CARB bearings is considerably higher than that of same-sized bearings with a cage.
The CARB bearing is a single row roller bearing with relatively long, slightly crowned rollers. The inner and outer ring raceways are correspondingly concave and symmetrical . The outer ring raceway geometry is based on a torus, hence the term toroidal roller bearing. The SKF toroidal roller bearing is designed as a non-locating bearing.
- skf C 3056 K + OH 3056 H CARB toroidal roller bearings
- Chrome Steel
- 2.8750 in
- 140 mm x 225 mm x 85 mm skf C 4128 V/VE240 CARB toroidal roller bearings
- Steel
- Triple Lip Seal
- 130 mm x 200 mm x 69 mm skf C 4026 V CARB toroidal roller bearings
- 181000 lbf
- 4.1875 in
- 900 mm x 1280 mm x 280 mm skf C 30/900 MB CARB toroidal roller bearings
- 22210, 22210K, 21308
- SNT 510-608, SNT 210
- 710 mm x 1030 mm x 236 mm skf C 30/710 M CARB toroidal roller bearings
- 710 mm x 1030 mm x 236 mm
- skf C 2320 K + H 2320 CARB toroidal roller bearings
- 2-11/16 in
- Powder Coated